05 06
Step 5
1. Hang Floodlight Camera on
the junction box with the hook
provided.
2. Connect both ground wires(both
yellow in color) from the junction
box and Floodlight Camera, join
the wires by using a wire nut.
To avoid risk of shock, injury or death, always be cautious when
working with electricity. Remember, do hire a professional
electrician if you’re uncomfortable working with electrical wiring.
Step 3
Shut down the circuit breaker in your house. Switch on/off the lights to make
sure the electricity in your house is properly shut off.
To avoid risk of shock, injury or death, always be cautious when
working with electricity.
Step 4
Remove the old Floodlight from the junction box and install the mounting
plate to the junction box.
The junction box and existing electrical wires are required to
Floodlight Camera installation.
The concaved side of the mounting plate must face outwards.
To Next Page
Loading...
