How to troubleshoot power problems in EunSung Vital Injector 2?
If you're experiencing power problems with your EunSung Medical Equipment, make sure the power cable is properly connected and that the power is on.
What to do if the EunSung Vital Injector 2 monitor freezes?
If the monitor of your EunSung Medical Equipment freezes, reboot the device. Turn it off, wait 10 seconds, and then turn it back on.
General| Model | Vital Injector 2 |
|---|---|
| Category | Medical Equipment |
| Injection Rate | Adjustable |
| Manufacturer | EunSung |
| Injection Depth | Adjustable |
| Injection Speed | Adjustable |
| Vacuum Level | Adjustable |
| Power Source | Electric |
Warns about electrical risks and proper connection procedures.
Highlights critical aspects of patient safety during treatment.
Describes the primary control unit and its components.
Details the handheld injector and its functional parts.
Instructions for connecting the main unit to its trolley.
Guidance on attaching the injector to the main console.
Steps for powering the device on and off.
How to correctly install the system's filter.
Covers the process of preparing and running the system.
Explains the display interface and its controls.
Lists potential system errors and their resolutions.
Provides solutions for common operational problems.
To Next Page
