To Next PageTo Next Page
Need help?Do you have a question about the Euphonic Audio iAMP and is the answer not in the manual?
Details proper grounding procedures to reduce the risk of electric shock and ensure safe operation of the product.
Explanation of the yellow LED indicator and Gain/Input Trim Pots for setting optimal input levels.
Variable filter for feedback elimination on Channel 2, attenuating frequencies from 50-600K at 0.05 octaves.
Low impedance mic input with selectable 48v phantom power, for condenser mics or dynamic mics requiring power.
180-degree sweepable phase control to adjust phase between Channel 1 and Channel 2 when both inputs are used.
General| Weight | 6.75 lbs |
|---|---|
| Dimensions | 3.25" H x 12" W x 9" D |
| Frequency Response | 20Hz - 20kHz |
| Power Output | 800W |
| Inputs | 1 x 1/4" Instrument Input |
| Speaker Outputs | 2 x Speakon |
| Outputs | 1 x Tuner Output |
| EQ | 4-Band (Bass, Low Mid, High Mid, Treble) |
| Type | Bass Amplifier Head |
| Effects Loop | Series Effects Loop |
