EURA E2000-0022 T3 - User Manual

FREQUENCY INVERTER
E2000
0,4kW – 400kW (IP20)
Safety instructions Installation
& operating manual
ENGLISH
w w w. e u r a d r i v e s . e u
E2000_Rev.02 -EN- SOFT Rev. 5.09
© 2017 EURA Drives GmbH

Summary

Common Installation and Safety Rules

Handling, Transportation, and Storage Guidelines

Inverter Installation in Cabinet

Electrical Wiring of Frequency Inverters

Detailed instructions and diagrams for electrical connections and wiring.

EMC Basics and Recommendations

EMC Adequate Installation Practices

Product Data and Power Range

Technical Data for E2000+ Series

Comprehensive technical specifications and data for the E2000+ inverter series.

Power Range and Framesize Chart

Table detailing power ranges, framesizes, and associated specifications.

Electrical Connections of E2000+ Inverters

230 V Single-Phase Inverter Wiring (E1-E3)

Wiring diagrams for 230V single-phase inverters, framesizes E1 to E3.

400 V Three-Phase Inverter Wiring (E2-E6)

Wiring diagrams for 400V three-phase inverters, framesizes E2 to E6.

400 V Three-Phase Inverter Wiring (C3-C6)

Wiring diagrams for 400V three-phase inverters, framesizes C3 to C6.

Brake Resistor Selection and Connection

Cable Sizing, Fuses, and Torque Specs

Earth and Ground Connection Details

Control Board and I;O Configuration

Control Board for E1-E6 Inverters (0.2-22 kW)

Hardware configuration and I/O channels for E1-E6 inverter series.

Control Board for C3-C6 Inverters (30-400 kW)

Hardware configuration and I/O channels for C3-C6 inverter series.

Main Terminal Functionality

Analogue Input Channel Configuration (E1-E6)

Setting up analogue inputs Al1 and Al2 for E1-E6 inverter framesizes.

Digital Output Channels (E1-E6)

Functions and configuration of digital outputs DO1 and relay output.

Analogue Output Channels (E1-E6)

Configuration of analogue outputs AO1 and AO2 for E1-E6 inverter framesizes.

Digital Input Channels (C3-C6)

Functions of digital input channels DI1-DI8 for C3-C6 inverter framesizes.

Analogue Input Channels (C3-C6)

Configuration of analogue inputs Al1 and Al2 for C3-C6 inverter framesizes.

Digital Output Channels (C3-C6)

Functions of digital outputs DO1, DO2 and relay output for C3-C6 inverters.

Analogue Output Channels (C3-C6)

Configuration of analogue outputs AO1 and AO2 for C3-C6 inverter framesizes.

Parameter Setting Procedures

Selecting, Modifying, and Saving Parameters

Step-by-step guide for parameter selection, modification, and saving.

Factory Default Reset Procedure

Instructions on how to reset all parameters to their factory default settings.

Inverter Control Group (200)

Start;Stop and Running Direction Control

Setting up start, stop, and direction control sources for the inverter.

Speed Reference Source Selection

Options for selecting the primary source for speed reference signals.

Combined Speed Reference Control

Methods for combining primary and secondary speed references for control.

Two;Three Wire Control Activation (F208)

Special activation modes for two/three wire START-STOP control.

Autostart and Error Reset Functions

Configuration of autostart after power-down and automatic error reset features.

Digital I;O Configuration Group (300)

Available Digital I;O Channels

Overview of digital inputs, outputs, and relay outputs across E2000 inverter sizes.

Digital Output Function Mapping

Assigning specific functions to digital output channels using parameters F300-F302.

Digital Input Function Mapping

Mapping various functions to digital input channels DI1-DI6/DI8 via parameters.

Fixed Frequencies Selection Table

Analogue I;O Configuration Group (400)

Analogue Speed Reference Channel Setup (E1-E6)

Setting up analogue inputs Al1 and Al2 for speed reference on E1-E6 framesizes.

Pulse Speed Reference Input Configuration

Analogue Output Configuration (AO1, AO2)

Pulse Output DO1 Configuration

DC-Brake Control and Auxiliary Functions Group (600)

DC-Brake Function Parameters

Current and Voltage Limiting Functions

Catch on the Fly Function

Power Drop Compensation Function

Error Handling and Protection Functions Group (700)

Display Error Codes and Descriptions

List of error codes, their reasons, remedies, and associated memory codes.

Inverter;Motor Overload Protection

Setting warning and trip thresholds for inverter and motor overload faults.

Fault History and Error Counters

Protection Function Configuration

Autotuning and Motor Data Programming Group (800)

Motor Data Programming Importance

Autotuning Modes Explained

Sensorless Vector Speed Controller Parameters

Permanent Magnet Synchronous Motor Control

PID Controller Setup Group (A00)

Integrated PID Controller Overview

Set-point and Feedback Channel Configuration

PID Controller Parameter Settings

Idling and Lack of Water Protection

Dual Pump Booster Control Setup

Emergency Functions Configuration

Speed and Torque Control Group (C00)

Speed vs. Torque Control Mode Selection

Torque Control Set-Point Origin

Torque Boost for Low Frequencies

Speed Limiting in Torque Control Mode

Torque Limiting in Speed Control Mode

Torque;Current Limit for Field Weakening

EURA E2000-0022 T3 Specifications

General

Brand	EURA
Model	E2000-0022 T3
Category	Inverter
Language	English