Eureka 3670 Series - How to Assemble Your Vacuum Cleaner

www.eureka.com 5
How to assemble your vacuum cleaner
Fig.1 Fig.2
Fig.3 Fig.4
Fig.5
Step 1: Connect hose
B
to front of canister
A
(Fig.1).
Step 2: Attach wands
C
or
D
to hose handle
(Fig. 2).
Step 3: Place oor tool
E
on end of wand
C
or
D
(Fig. 3).
Step 4: Place combination tool
G
in storage
position on the back side of the canister
(Fig. 4).
Step 5: Wrap cord around cord hooks on the
bottom of the canister and snap plug into
place over cord (Fig. 5).
Step 6: For models with HEPA lter
I
, refer to
page 8.