EasyManua.ls Logo

Eureka 4464AT - Page 7

Eureka 4464AT
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
8. Remove front cover, grasp both sides of bag cover
near top. Push thumbs against center of cover and
pull out on sides.
9. Check to be sure the paper bag collar is secure with
the hose adapter inside the paper bag collar.
10. Replace front bag cover.
11. You will find your cord retainer either at the bottom
of the upper cord hook or on the handle above the
upper cord hook. Firmly push the electrical cord
down into either cord retainer. This will place the
cord out of the way the next time you vacuum.
12. Next wind the cord around the two cord hooks on
the left side of cleaner.
On some models the upper
cord hook turns to release the cord. Turn the hook
up to store the cord.
NOTE: For easier access to bag compartment, when
you store the electrical cord use a figure 8
pattern.
13. Secure the plug to the cord to prevent unwinding.
Hose
Adapter
|
|
8
10
Cord
Hook
Step E Store Electrical Cord
Step C Store Hose and Accessories Step D Check Disposable Dust Bag
Combination
Tool
Crevice
Tool
Hook
Hose
Retainer
Tabs
Paper Bag Collar
9
Back View of
handle and
tools on some
models
Dusting
Brush
Upholstery
Nozzle
Cord
Hook
Cord
Retainer
11
11
12
12
Cord
Retainer
Extension
Wand or
Wands
Carrying
Handle
HEPA Filter
(on some
models)

Related product manuals