To Next PageTo Next PageHow to troubleshoot a Eureka Vacuum Cleaner that will not turn on?
If your Eureka Vacuum Cleaner is not operating, first ensure the power cord is firmly plugged into the outlet. Then, check the wall outlet for power by testing the fuse or breaker and replacing or resetting if necessary. For thermostat issues, see Automatic Motor Shut-Off on page 4.
What to do if my Eureka 63 hose or brushes will not pick up?
If the hose or brushes of your Eureka Vacuum Cleaner are not picking up debris, start by removing the hose and/or brushes and clearing any obstructions. Also, make sure to empty and clean the dust cup and dust cup filter.
Why is the suction power weak on my Eureka 63?
If your Eureka Vacuum Cleaner's suction is weak, start by emptying the dust cup. If that doesn't solve the problem, turn off and unplug the unit to check for any clogs. Finally, make sure to clean or replace the dust cup filter.
What to do if dust is escaping from my Eureka 63 Vacuum Cleaner?
If dust is escaping from your Eureka Vacuum Cleaner, start by emptying the dust cup and cleaning the filter. If the problem persists, review the dust cup filter installation instructions to ensure it's correctly installed. If you find a puncture or hole in the filter, replace it.
General| Brand | Eureka |
|---|---|
| Model | 63 |
| Category | Vacuum Cleaner |
| Language | English |
Provides contact details and guidance for obtaining vacuum cleaner service.
Explains the location and importance of the model and serial number plate.
Details the overheat protection feature and troubleshooting steps for the vacuum.
Step-by-step instructions for removing, emptying, and cleaning the dust filter.
Outlines what is covered and excluded by the vacuum cleaner's limited warranty.
Instructions on how to get the vacuum cleaner serviced under warranty.
