ENGLISH
HOW TO MAINTAIN
The instructions given in this booklet serve as a guide to
routine maintenance. Keep the cleaner operating at top
efficiency. Empty the dust cup after each use.
Empty Dust Cup
Step 1: Slide dust cup latch
●
B
up.
Step 2: Pull dust cup
●
D
from handle section and lift from
the nozzle
●
O
(Fig. 9).
Step 3: Pull the filter
●
E
out of the dust cup
●
D
, shake
contents of dust cup into a waste container (Fig. 10).
Step 4: To replace dust cup
●
D
, reinstall filter
●
E
in dust
cup and fit dust cup into nozzle
●
O
.
Step 5: Gently squeeze the sections together until the dust
cup latch
●
B
locks the cup in place (Fig. 11).
Clean Dust Cup Filter
Note: Do NOT operate cleaner without the filter in place.
Clean the dust cup filter as necessary (Fig. 12).
Step 1: Remove dust cup
●
D
.
Step 2: Pull dust cup filter
●
E
frame out of dust cup
●
D
.
Step 3: Shake and brush the dust and dirt from filter
●
E
.
Step 4: If desired, launder the filter
●
E
by hand. Wash
filter in warm water using mild detergent.
Note: The dust cup filter is not dishwasher safe. Do
not put in dishwasher.
Step 5: Air dry thoroughly.
Step 6: Replace filter frame in dust cup
●
D
by pushing the
seal located at the top in firmly to ensure proper
filter
●
E
performance.
Replace a dirty or torn filter. Order additional dust cup
filter, part number 61544.
FIG. 9
FIG. 10
FIG. 11
FIG. 12
12
●
D
●
D
●
O
●
D
●
D
●
E D
●
O
●
B
●
B
(CONTINUED)
To Next Page
Loading...
