Eureka AS2000 series - Get Ready To Vacuum; To Vacuum Floors; To Vacuum with Hose and Tools

Get Ready To Vacuum
To Vacuum Floors
To Vacuum with Hose and Tools
To vacuum oors,
turn air path knob
to ‘oors.’
Adjust height for
carpet or bare
oors.
Step on foot
graphic on hood
and pull back on
handle to recline
vacuum. Step on
power switch to
turn on; step on
again to turn off.
If desired, route
cord through cord
clips before storing
on hooks
For hose cleaning turn air path knob to “tools”. Attach tools to end of wand. To
replace, store crevice tool inside extension wand and store this, dusting brush
and turbo nozzle (for some models) in clips.