20
Other routine maintenance
▪ How to clean the cyclone
Press the upper release
tab to open the top of
the dust cup.
01
Rinse the cyclone with clean water and make sure it is
completely dry before putting it back.
Note: Do not use detergents, polishes or air fresheners
to clean the dust cup and cyclone to avoid corrosion.
03
Take out the sponge
filter and the cyclone
(use the handle) as
shown in figure.
02
Place the cyclone and sponge filter back down into their
regular positions. Close the dust cup so it clicks into place.
04
▪ How to clean the filter
Press the release tab of
the cover of the filter on
the back of the base to
remove the cover.
01
Rinse the filter with
clean water until it is
clean. Make sure the
filter is completely dry
before putting it back.
02
Place the dust cup back
into the self-emptying
base.
05
Flip the slide switch to
the right to lock the
dust cup.
06
Release Button
To Next Page
Loading...
