OPERATION GUIDE
1.
OPERATION GUIDE
Rear slot
Front slot
After the dust container is installed, install the mop upward onto the pad
holder until you hear a “click” sound
INSTRUCTION FOR ASSEMBLY OF PAD
The suction port of the dust container faces forward and the bulge faces
down. Put it into the two slot on the front of the pad holder until you hear a
“click” sound.
INSTRUCTION FOR ASSEMBLY OF DUST CONTAINER
Insert the adapter into the socket, put the magnetic charger on the back port
of the machine which will be automatically contacted, then connect the
power to charge.
INSTRUCTION FOR CHARGING
FUNCTIONS
Open the lid of water tank. Add water to the tank max line through the
water hole and then close the lid.
2.
Close the top cover of the water tank to ensure that it is tight and does not
loose.
REFILL WATER TANK WITH WATER
Charging time is about 4 hours.
The running time of the machine is about 20 minutes after it is fully
charged.
The indicator light flashes during charging. After it is fully charged, it
will be on 10 minutes.
Do not charge below 0℃ or above 40℃.
When the product is out of power during operation, the indicator
light flashes to remind charging.
The battery is not charged when leaving the factory. Please make
sure the battery is fully charged for the first time to use.
2.
3.
4.
5.
6.
1.
6 7
To Next Page
Loading...
