ENGLISH
INSTRUCTIONS FOR USE
• Before operating the vacuum cleaner, make certain that the dust bag
and lters are in the proper position.
• Pull all of the power supply cord out from back of cleaner and plug
into electrical outlet.
Note: When pulling on power supply cord watch for a yellow line on
the cord. Then continue slowly pulling on cord till you see the red
line, stop. The red line indicates the end of usable cord.
• Press the ON/OFF button to switch the appliance on.
• To rewind the power cord, press the rewind button with your foot,
and guide the cord with your hand to ensure that it does not whip
causing damage.
• By moving the suction dial control, the suction power can be ad-
justed.
1 The suction control button on the hose handle is used to reduce suc-
tion for delicate work such as cleaning drapes or picture frames.
HOW TO USE
Floors should be cleaned regularly over heavily traveled areas, and once
a week over the entire area. Vacuum slowly, making several passes (for-
ward and backward), covering small areas at a time. The time required to
clean will depend on several factors - including type of oor and amount
of dirt.
Cleaning Tools
2 Combination Crevice Nozzle/Brush Tool: (stored on tool clip
on wand): For crevices, corners, baseboards, between cushions.
Brush rotates to allow use as brush or crevice depending on task.
*on some models.
3 Upholstery Nozzle: (stored on tool clip on wand): For curtains,
draperies, cushions, fabrics. *on some models.
4 Dual Purpose Floor Nozzle: Use foot to change from
hard surface to carpet setting
5 Turbo Brush: For upholstery and for stairs. *on some models.
4.
5.*
1.
2.*
3.*
Hose Suction Control Button
*
*
10
To Next Page
Loading...
