To Next PageTo Next Page
Need help?Do you have a question about the Euro-Pro STEAM BLASTER EP95B and is the answer not in the manual?
Details on how to claim warranty service, including return procedures and required documentation.
Form to register product ownership within 10 days of purchase for warranty purposes.
Details on the 'flow through injection' boiler, heat-up time, and steam output stabilization.
Guidance on water types, temperature, towel usage, and floor cleaning.
Key precautions to prevent fire, electric shock, or injury during use and maintenance.
Instructions to maintain the unit in an upright position to prevent hot water exit and injury.
Information regarding the 3-wire plug and the importance of using a compatible outlet.
Instructions for using the steam on/off switch and important cautions related to its use.
Guidance on using the squeegee attachment for cleaning windows, tiles, and ceramic surfaces.
Information on using the detail attachment for hard-to-reach areas like radiators and fixtures.
Overview of included accessories like hose, extensions, brush, concentrator, and squeegee.
Steps for assembling the unit, filling the water reservoir, and initial power-up.
Procedure for clearing mineral deposits from the nozzle orifice to restore steam output.
Details on how to claim warranty service, including return procedures and required documentation.
Form to register product ownership within 10 days of purchase for warranty purposes.
Details on the 'flow through injection' boiler, heat-up time, and steam output stabilization.
Guidance on water types, temperature, towel usage, and floor cleaning.
Key precautions to prevent fire, electric shock, or injury during use and maintenance.
Instructions to maintain the unit in an upright position to prevent hot water exit and injury.
Information regarding the 3-wire plug and the importance of using a compatible outlet.
Instructions for using the steam on/off switch and important cautions related to its use.
Guidance on using the squeegee attachment for cleaning windows, tiles, and ceramic surfaces.
Information on using the detail attachment for hard-to-reach areas like radiators and fixtures.
Overview of included accessories like hose, extensions, brush, concentrator, and squeegee.
Steps for assembling the unit, filling the water reservoir, and initial power-up.
Procedure for clearing mineral deposits from the nozzle orifice to restore steam output.
The Shark Steam Blaster, Model EP95B, is a modern vapor steam cleaning appliance designed for household use. It utilizes the power of steam to clean various hard surfaces without the need for chemical cleaning products. This "flow through injection" type boiler system is not pressurized, meaning it takes approximately 45-90 seconds for the steam injector to heat up and the "steam ready light" to go off. Once the light is off, the steam switch on the handgrip can be pushed to "On" (I) to start the steam flow. Steam power gradually increases during the first four minutes of use, then stabilizes. It's normal for some steam to condense around the floor brush, causing hard surfaces to become wet during cleaning.
The Shark Steam Blaster is primarily used for cleaning hard surfaces such as hardwood, vinyl, tile, and marble floors. It's also effective for tasks like removing wallpaper, washing windows, and degreasing various surfaces around the home. The appliance generates steam at a temperature between 220°F and 240°F at the nozzle tip, which falls to 100°F at a distance of 10 inches. This high-temperature steam helps to loosen dirt and grime, allowing for effective cleaning.
The device is designed for ease of use with several features and accessories:
General| Brand | Euro-Pro |
|---|---|
| Model | STEAM BLASTER EP95B |
| Category | Steam Cleaner |
| Language | English |
