SETTING TEMPERATURES ON SERVITHEQUE MODELS (multi-temperature)
Hot and cold circuit "on"
indicators (red and green)
TEST button
Temperature displays: Display the temperatures inside your wine
cabinet.
Setting knobs: Used to select the desired cabinet temperatures.
Operation indicators: Indicate operation of the hot (red)
or cold (green) circuit.
TEST button: Used to test the operation of your
cabinet's circuits (see section 8).
On / Off switch
Lowest cabinet temperature display
Knob for setting your cabinet's lowest
temperature (lower section of cabinet)
Knob for setting your cabinet's highest
temperature (upper section of cabinet)
Your wine cabinet's temperatures are entirely controlled from the control panel, which is shown below:
To set the temperature of your Servith•que cabinet:
Turn the lowest temperature setting knob (on the left)
until the gold line points to the lowest temperature you
want inside your cabinet (this temperature will be obtai-
ned in the lower section).
Recommended setting range: 7 to 12°C (45° to 54°F)
Turn the highest temperature setting knob (on the right)
until the gold line points to the highest temperature you
want inside your cabinet (this temperature will be obtai-
ned in the upper section).
Recommended setting range: 15 to 21°C (59° to 70°F)
- 9 -
Highest cabinet temperature
display (upper section of cabinet)
To operate correctly, a Servith•que cabinet must be placed in a room whose temperatures remain between 12 and 35¡C (54¡ to 92¡F).
It is possible, even if the settings in this manual are respected, that you will be unable to obtain the precise temperature desired. Each case is individual and slight
setting adjustments may be necessary.
To Next Page
Loading...
Need help?
General
