The Eurolite LED D-800 Beam Effect is a lighting fixture designed to create decorative light effects, primarily for professional applications such as stages, discotheques, and theaters. It is intended for indoor use only and operates on a 230 V, 50 Hz AC power supply.
Function Description:
The device is a beam effect with two 8W quadcolor LEDs. It features two lens rows with a total of 16 glass lenses, which combine to produce a room-filling effect. One LED is a 4-in-1 type, emitting red, green, blue, and white colors, while the other is a 4-in-1 type, emitting red, green, blue, and amber colors. The fixture offers various functions including static colors, multi-colored beams in RGBAW (Red, Green, Blue, Amber, White), color change, color fade, strobe effects, and motor-step adjustments. These functions can be controlled via DMX or in standalone mode with Master/Slave capabilities.
Important Technical Specifications:
- Power Supply: 230 V AC, 50 Hz
- Power Consumption: 90 W
- Number of DMX Channels: 3
- DMX512 Connection: 3-pin XLR
- Sound Control: Via built-in microphone
- LED Type: 8 W QCL (Quad Color LED)
- Number of LEDs: 2
- Beam Angle: 100°
- Dimensions: 340 x 370 x 285 mm
- Weight: 4.6 kg
- Maximum Ambient Temperature (Ta): 45° C
- Maximum Housing Temperature (Tc): 50° C
- Minimum Distance from Flammable Surfaces: 0.5 m
- Minimum Distance to Lighted Object: 0.1 m
- Fuse: F 2 A, 250 V
Usage Features:
The LED D-800 offers flexible operation modes:
- DMX Mode: The device can be controlled by any commercial DMX controller. It features comfortable addressing and setting via a control panel with an LED display and three operating buttons (MODE, UP, DOWN). The DMX start address (001-512) can be defined, allowing the device to respond to signals from the controller on the specified channel. For proper DMX data link transmission, a 120 Ω termination plug must be inserted into the DMX output of the last fixture in the chain.
- Standalone Mode: The device can operate without a DMX controller.
- Master/Slave Operation: Multiple units can be synchronized, with one device acting as the master and controlling all connected slave devices via a DMX cable. The master device's OUT jack connects to the IN plug of the next slave device.
- Sound Control: An integrated microphone enables sound-controlled operation. The "Fuzzy Sound Control" feature ensures that the program continues automatically during periods without music or bass beats. The sensitivity (00-99) can be adjusted using the UP or DOWN buttons.
- Installation: The device is designed for easy installation and includes a mounting bracket with locking possibilities. For overhead rigging, it must be secured with a secondary safety attachment, such as a safety bond, and installed by an authorized dealer following BGV C1 and EN 60598-2-17 standards. A minimum free space of 50 cm around the device is required for adequate air circulation. The maximum drop distance for the safety bond must not exceed 20 cm.
- Control Panel: The control panel consists of an LED display, a MODE button, an UP button, a DMX indicator, and a DOWN button for easy navigation and setting adjustments.
Maintenance Features:
- Cleaning: Regular cleaning of the device is recommended using a soft, lint-free, and moistened cloth. Alcohol or solvents should not be used.
- Fuse Replacement: If the fine-wire fuse is defective, it must be replaced with a fuse of the same type and rating. Before replacing the fuse, the device must be disconnected from the mains power supply. The fuse holder can be unscrewed from the housing using a screwdriver.
- Service: Other than the fuse, there are no serviceable parts inside the device. All maintenance and service operations must be carried out by authorized dealers.
- Safety: The device is designed for safety, but users must adhere to all safety instructions, including never looking directly into the light source, keeping children and amateurs away, and never leaving the device running unattended. The power cord and connections should be handled with care, and the device should be disconnected from the mains when not in use or before cleaning. In case of damage to the power supply cable, it must be replaced by authorized dealers to prevent hazards.
Need help?
General
To Next Page