Operation
Install the water inlet hose
and turn on the tap.
When the preset operation finishes,
the machine will power off automatically.
Plug-in power.
Press POWER ON/OFF
to turn on the machine
Press PROGRAM to select
the desired program.
Press WATER LEVEL to set
the water level.
Press START/PAUSE to start.
The drain pipe should be
put down or hung up
below 0.9m.
- 8 -
Safety warning
Warn Forbid
Make sure the voltage in your living area
corresponding to the one shown on the rating
label of the appliance. And the wall socket is
properly grounded.
The power cord must be unplugged when the
unit is idled, removed ,cleaned or at power
failure.
Grounded
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
qualified technician in order to avoid a shock hazard.
WATER SAVING
SOAK & WASH
CHILD LOCK(FLASH)
To Next Page
Loading...
Need help?
General
