To Next PageTo Next Page
Need help?Do you have a question about the Eurotherm 582 and is the answer not in the manual?
Detailed specifications including input/output ratings, supply voltage, current, frequency, and power.
Conditions like humidity, altitude, atmosphere, and operating temperature for the drive.
Physical dimensions, enclosure types, mounting orientation, and clearances for the drive.
Descriptions of digital and analogue input/output terminals for 582 and 583 models.
Descriptions of digital and analogue input/output terminals for the 5831 model.
Details of input, brake, and motor power terminal connections for different models.
Explanation of potentiometers (P1-P6) for adjusting drive parameters like speed, current, and ramps.
Configuration of DIP switches (SW1-SW12) for setting base frequency, V/F characteristics, and stopping modes.
Guidelines for installing and securing the motor, ensuring correct connections and ventilation.
Instructions for connecting control and power cables, including EMC considerations and cable types.
Specific requirements and precautions for installations to meet UL standards.
Steps before connecting power, including checks and load disconnection.
Procedures for powering up the drive, checking motor rotation, and initial settings.
Practical advice for optimizing drive performance and installation.
Details on the option card for speed reference and zero speed indication.
Configuration of switches for current loop formats and zero speed settings.
Technical specifications for the option card, including accuracy, impedance, and voltage.
Guidance on how to correctly install the option card onto the inverter.
Explanation of CE marking and EMC compliance for the drives.
Information on AC supply filters required for EMC compliance and their part numbers.
Details on how to mechanically mount the EMC filters.
Specific installation and screening instructions for wall-mounted units.
Specific installation and screening instructions for cubicle-mounted units.
Guidelines for screening control and signal cables for EMC compliance.
Procedures for proper earthing of the drive and associated components for safety and EMC.
Tables detailing minimum EMC immunity and maximum emission performance.
Contact information for the main Eurotherm Drives office.
General