To Next PageTo Next Page
Need help?Do you have a question about the Eurotherm 601 and is the answer not in the manual?
Highlights risks like rotating machinery, high voltages, and capacitor discharge.
User must provide guarding and safety systems.
Provides detailed electrical parameters and ratings.
Provides guidelines to prevent interference and ensure EMC compliance.
Lists and describes parameters that can be adjusted by the user.
Explains the various status indicators and their meanings.
Describes the diagnostic codes and their interpretations.
Instructions on how to use the keypad for local control.
Detailed table of control terminal functions, ranges, and notes.
Table detailing power terminal functions, ranges, and notes.
Electrical ratings for 220/240V single-phase models.
Electrical ratings for 380/460V three-phase models.
General electrical specifications applicable to all 601 units.
Details minimum clearance needed for proper airflow and cooling.
Explains the coding for model, voltage, power, and language.
Instructions for wiring to prevent interference and ensure EMC compliance.
Recommendations for screened motor cables and connections for EMC.
Table showing how terminal settings control motor speed.
Explains the Class 10 overload protection and current limit.
Describes the built-in short circuit protection.
Explains the function of the dynamic braking circuit and resistor.
Provides formulas and data for selecting appropriate brake resistors.
Lists parameters P1-P6 with descriptions, ranges, and defaults.
Lists parameters P7-P15 with descriptions, ranges, and defaults.
Explains voltage boost for low-speed torque and provides a V/F curve.
Details the three available stopping modes: Ramp, Coast, and Injection.
Lists drive status mnemonics, descriptions, and possible causes.
General