Why is my EvaKool TRAVELMATE Refrigerator showing low voltage?
If you are experiencing low voltage with your EvaKool Refrigerator, first check the source voltage to ensure it is above the cut out. You might also try lowering the voltage cut out setting to L. Additionally, the vehicle cabling may be inadequate or unsuitable, so refer to the cable specifications table for the correct cable thickness.
How to fix EvaKool Refrigerator that is not turning on?
If your EvaKool Refrigerator isn't turning on, there are several things you can check. First, examine the power supply. Second, make sure the plug and socket have a secure connection. Third, verify that the fuse hasn't blown. Finally, ensure that the refrigerator is actually switched on.
What to do if the compressor speed is too low on my EvaKool TRAVELMATE Refrigerator?
If your EvaKool Refrigerator's compressor speed is too low, try the following: reduce the number of products inside the unit, move the unit to a location with a lower ambient temperature, and clean the vents to ensure clear airflow over the compressor.
Why is my EvaKool TRAVELMATE making unusual noises?
If you notice unusual noise when your EvaKool refrigerator is working, it might not be placed on a level surface. If the issue persists, a part may have come loose inside the refrigeration compartment, in which case you should see a service agent.
Why is my EvaKool TRAVELMATE Refrigerator showing bad performance in refrigeration?
There are several reasons for poor refrigeration performance in your EvaKool refrigerator. It could be due to too much food inside, the lid being unlocked or open, a broken lid seal, poor ventilation, too much warm product inside, insufficient room around the fridge and vents, a nearby heat source, or an inappropriate temperature setting.
Why is the food inside my EvaKool Refrigerator frozen?
If the food inside your EvaKool Refrigerator is frozen, it may be because the set temperature is too low.
Why do I hear the sound of water from inside EvaKool TRAVELMATE Refrigerator?
This sound is normal; it is due to the flow of the refrigerant.
Key safety warnings including handling cables, wet connections, fused circuits, professional installation, and device placement.
Ensuring proper ventilation, avoiding humidity, preventing frost buildup, and placing the unit on a stable, heat-free surface.
Details on the electronic control module, compressor motor function, and four-stage battery protection levels.
Recommended DC cable cross-sections for specific lengths to ensure proper current flow and prevent voltage drop.
Explanation of the control panel layout, buttons, display, and indicator lights for unit operation and settings.
Step-by-step guide for setting temperature, switching between °C/°F, and understanding ECO, BOOST, and AUTO modes.
Instructions for cleaning the interior and exterior using specific solutions, avoiding abrasive materials and running water.
Addresses appliance not turning on, food freezing, poor refrigeration, water sounds, and unusual noises with potential solutions.
Details error codes indicated by LED flashes, their reasons (e.g., low voltage, fan issues), and suggested solutions.
Provides key technical data including climatic category, rated voltage, fuse, power input, current consumption, and refrigerant type.
Lists the standard items included with each fridge model, such as the fridge itself, AC adapter, DC cable, and cover.
Outlines warranty coverage, claim procedures, exclusions (e.g., modifications, misuse), and consumer rights.
Visual guide to diagnose issues like 'Not Cooling' or 'No Lights' based on fault LED flashes and compressor/fan status.
General| Refrigerant | R134a |
|---|---|
| Digital Display | Yes |
| Voltage | 12V/24V DC, 240V AC |
| Cooling Capacity | 30°C below ambient temperature |
| Insulation | High density foam |
To Next Page