EVCO S.p.A.
EVBOX1 | Installation guide ver. 2.0 | Code 144BOX1E204
page 90 of 100
rtc
Clock error
Solutions:
-
set the date, time and day of the week
Main consequences:
-
if parameter d8 is set at 4, the device will operate as if it were set at 0
-
the “HACCP” function will not provide information regarding the date and hour in which the alarm was
signalled
-
the “energy saving” function n real time function will not be activated in real time
-
the alarm output will be activated (provided that parameter u1 and/or parameter u11 is set at 3)
When the cause of the error disappears, the device restores normal operation, except for clock error (“rtc” code), which requires the
date, time and day of the week set.
To Next Page
Loading...
Need help?
General
