Evco EVBOX1 EVB1206 - User Manual

EVCO S.p.A. EVBOX1 | Installation guide ver. 2.0 | Code 144BOX1E204
page 1 of 100
EVBOX1
Front mounted electrical boards for cold
rooms with single-phase compressor
Installation guide| ENGLISH
Code 144BOX1E204

Summary

DIMENSIONS AND INSTALLATION

Dimensions

Installation

Guides the user through the physical mounting and installation process.

Installation warnings

Lists critical warnings and precautions for device installation.

ELECTRIC CONNECTION

Electric connection for models EVB1204 and EVB1214

Wiring diagram and connection details for specific EVBOX1 models.

Electric connection for models EVB1206 and EVB1216

Wiring diagram and connection details for specific EVBOX1 models.

Electric connection for models EVB1226 and EVB1236

Wiring diagram and connection details for specific EVBOX1 models.

Electric connection for models EVB1246 and EVB1256

Wiring diagram and connection details for specific EVBOX1 models.

Electric connection for models with direct loads connection (example for EVB1216 N9 XXC)

Electric connection for models with data logging extension for EN 12830 standard compliance (example for EVB1214 N9 XLC)

Electric connection for models with magneto-thermal switch or differential magneto-thermal circuit breaker (example for EVB1256 N9 D)

Insertion of the RS-485 MODBUS port termination resistor

Connection of the RS-485 network cable screen to GND

Warnings for the electric connection

FIRST USE

First use

Step-by-step guide for initial setup and operation of the device.

USER INTERFACE

Device switch-on;off in manual mode

Displaying the magnitude detected by an analogue input

Rapid cooling function enabling;disabling

Defrosting manual activation

Keyboard locking;unlocking

OPERATION WITH LOW OR HIGH RELATIVE HUMIDITY PERCENTAGES (ONLY IF THE FO PARAMETER IS SET TO 5)

Manual activation of the low and high relative humidity percentages operating mode

ENERGY SAVING FUNCTION

Preliminary notes

HACCP FUNCTION

Preliminary notes

Overview of HACCP alarms and data logging.

Display of HACCP alarm information

How to view stored HACCP alarm data.

Cancelling the HACCP alarm list

DATA LOGGING EXTENSION FOR EN 12830 STANDARD COMPLIANCE

Preliminary information

HACCP writing mode

Details on how HACCP data is written to the CSV file.

Service writing mode

Activating the service writing mode

Showing the errors about the data logging extension

COMPRESSOR OPERATING HOURS COUNT

Preliminary notes

Display of Compressor Operation Hours

Cancelling the compressor operation hours

SETTINGS

Setting the date, time and day of the week (only in the models with clock)

Setting the working set point

Procedure to adjust the main operating temperature set point.

Setting the configuration parameters

General procedure for accessing and modifying device parameters.

Restoring the Manufacturers settings

How to reset the device to its factory default configuration.

List of configuration parameters

Comprehensive list and explanation of all configurable parameters.

WARNING LIGHTS AND DIRECTIONS

Signals

Signal Descriptions;Explanations

ALARMS

Alarms

Lists and explains alarm codes, their causes, and consequences.

ERRORS

Errors

Lists and explains error codes, their causes, and consequences.

TECHNICAL DATA

Technical data

Provides detailed technical specifications for the device.

Evco EVBOX1 EVB1206 Specifications

General

Brand	Evco
Model	EVBOX1 EVB1206
Category	Control Unit
Language	English