EVCO S.p.A.
EVBOX1 | Installation guide ver. 2.0 | Code 144BOX1E204
page 4 of 100
1 INTRODUCTION
1.1 Introduction
EVBOX1 is a line of front mounted electrical boards for the
management of cold rooms with single-phase compressor.
The user interface comprises a large custom display (with
decimal point and function icons), six keys, and has a
guaranteed IP65 protection grade front part.
The boards are equipped with two 30A res. @ 250 VAC relays
for the direct control of high power compressors and
defrosting elements, with no need for remote control switches.
They can operate in conditions of both low and high relative
humidity percentages, have an adaptive management of the
defrost function, and can implement energy-saving strategies.
Some models are also equipped with a magneto-thermal
switch or differential magneto-thermal circuit breaker, a clock
(to save the HACCP alarms), management of defrosting
elements and have an integrated driver for unipolar stepper
electronic expansion valves; some more of a data logging
extension (on SD card) for EN 12830 standard compliance.
The unit is designed to be wall mounted, with bolts and
fastening screws.
To Next Page
Loading...
Need help?
General
