Evco EVBOX1 EVB1206 User Manual

EVCO S.p.A. EVBOX1 | Installation guide ver. 2.0 | Code 144BOX1E204
page 11 of 100
2.2 Interior description
To access the interior of the devices, proceed as follows (numbers in parentheses refer to the part number shown in the tables in
paragraph 2.1 “Outward appearance description"):
1. Open the access door of the magneto-thermal switch or differential magneto-thermal circuit breaker (1) using the relevant
handle (4) and loosen the two screws fastening the front shell to the back shell (2) with a screwdriver.
2. Remove the cover of the two screws fastening the front shell to the back shell (6) using the relevant handle (5) and loosen
the two screws fastening the front shell to the back shell (2) with a screwdriver.
3. Lift the front shell (18) using the assembly tabs fastening the front shell to the back shell (3) as a pivot.
The following drawing shows the inner appearance of the devices.

Evco EVBOX1 EVB1206 Specifications

General

Brand	Evco
Model	EVBOX1 EVB1206
Category	Control Unit
Language	English