Need help?Do you have a question about the EVE Light Strip and is the answer not in the manual?
General| Manual | Yes |
|---|---|
| Housing color | White |
| Quantity per pallet | 1000 pc(s) |
| Master (outer) case width | 580 mm |
| Master (outer) case height | 130 mm |
| Master (outer) case length | 770 mm |
| Master (outer) case weight | 16000 g |
| Master (outer) case net weight | 14500 g |
| Quantity per master (outer) case | 100 pc(s) |
Weight and Dimensions| Width | 15 mm |
|---|---|
| Height | 4 mm |
| Weight | 103 g |
| Package depth | 150 mm |
| Package height | 20 mm |
| Package weight | 145 g |
Connect the Eve Light Strip to the controller and power. The strip will perform a color cycling test.
Shorten the Eve Light Strip by cutting along indicated trim lines (approx. every 30 cm).
Download the Elgato Eve app from the App Store to manage your devices.
Tap 'Add Accessory' in the Eve app or go to Settings to add Eve Light Strip to your home.
Connect additional strips to extend the Eve Light Strip to a maximum length of 10 meters.
The light source is non-replaceable; the entire strip must be replaced at end of life.
Reset Wi-Fi settings by pushing the button for 6 seconds and re-entering credentials via Settings.
Perform a factory reset by pushing the button for 12 seconds and use the HomeKit code to re-add.
Keep your HomeKit Setup Code safe for secure addition and to prevent unauthorized access.
To Next Page