32
How Eve Smoke works
Eve Smoke is designed to detect smoke and heat in residential buildings, apartments, and mobile homes.
It unites two detection principles: optical smoke detection and thermal differential heat detection.
The smoke sensor detects slow-developing fires which can smolder for hours before flaming.
The heat sensor detects fires that develop moderately to rapidly, adding an extra level of detection
that standard optical smoke alarms do not provide. A heat alarm is triggered depending on how
quickly the air temperature rises (in accordance with the EN 54-5 standard):
2
Eve Smoke will continue to alert you until no smoke or heat is detected, or until the alarm is silenced. A
smoke and heat alarm will be displayed in the Eve app. Using the Home app, you can also enable alarm
notifications by accessing the Details view of Eve Smoke.
Eve Smoke will alert you as follows:
In addition to performing regular and proper maintenance, it is recommended that Eve
Smoke be replaced no later than the replacement date listed on the back of the unit, or in
the event of a non-resettable battery fault (see chapter 8).
Normal operation
Smoke alarm
Heat alarm
7:13 - 16:00
4:09 - 10:00
2:00 - 5:30
1:00 - 3:13
0:40 - 2:25
29:00 - 46:00
1
3
5
10
20
30
Temperature rise
(°C/minute)
Response time
(minutes)
Yellow, every 10 seconds
Red, rapid flash
Constant sound
Sound
(85 dB(A) at 3 m)
Red, rapid flash
Sound/pause every 1 secondOn
On
Status LED Emergency light
To Next Page
Loading...