EVE Smoke - Pausing Alarms

1110
Muting alarms
After smoke or heat has triggered an alarm, you can use any of the following methods to mute it:
• Open the Eve app
• Press the Test button on Eve Smoke
• Hold any infrared remote control (TV, Blu-ray player, hi-fi system remote), point it at the alarm
which has been triggered, and press any button on the remote twice
The alarm will be muted for 15 minutes. If smoke is still detected after 15 minutes, the alarm will
sound again.
Eve Smoke in everyday use
Pausing alarms
You can deactivate Eve Smoke for approximately 15 minutes to avoid triggering an unnecessary
alarm when engaging in activities that may create dust or smoke (dusting, cleaning a fireplace,
roasting food, etc.).
Give the Test button a quick press to temporarily pause the alarm. The following status will be
displayed:
Press the Test button again to reactivate Eve Smoke. Eve Smoke will make a sound and the red
Status LED will switch off.
After approximately 15 minutes, Eve Smoke will automatically revert back to normal operating mode.
WARNING: Eve Smoke cannot trigger an alarm
during this 15-minute period.
7
Alarm paused
Red, every 2 seconds single beep
Status LED Emergency light Sound
For your safety, an alarm can only be muted using the Eve app when the
respective Eve Smoke accessory is in direct range, and only when the Eve app is
displayed on the screen.