EasyManua.ls Logo

EVE WOLF - Installation Guidelines; Built-in Oven Installation

EVE WOLF
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
o Attempting to install or repair the appliance without the assistance of qualified
personnel.
Qualified personnel must be contacted in the following cases:
o Installation (following the manufacturers instructions);
o When in doubt about operating the appliance;
o Replacing the electrical socket when it is not compatible with the appliance plug.
o The temperature probe is a part of thermostat, if damaged; they shall be replaced
overall by authorized service person.
Service Centers authorized by the manufacturer must be contacted in the following cases:
o If in doubt about the soundness of the appliance after removing it from its
packaging;
o If the power supply cable has been damaged or needs to be replaced;
o If the appliance breaks down or functions poorly; ask for original spare parts.
It is a good idea to do the following:
o Steam cleaner cannot be used to clean the oven;
o Only use the appliance to cook food and nothing else;
o Check the soundness of the appliance after it has been unpacked;
o Disconnect the appliance from the electrical mains if it is not functioning properly
and before cleaning or performing maintenance;
Installation
Only a qualified person in compliance with the instructions provided must install the
appliance. The manufacturer declines all responsibility for improper installation, which may
harm persons and animals and damage property.
Important: - The power supply to the appliance must be cut off before any adjustments or
maintenance work is done on it;
o Air duct is supposed to use in Ventilation.
It is a good idea to do the following:
o Steam cleaner cannot be used to clean the oven;
o Only use the appliance to cook food and nothing else;
o Check the soundness of the appliance after it has been unpacked;
o Disconnect the appliance from the electrical mains if it is not functioning properly
and before cleaning or performing maintenance;
o When left unused, unplug the appliance from the electricity mains
o Use oven gloves to place cookware in the oven or when removing it
o Always grip the oven door handle in the center
o Make sure the knob is in position when the appliance is not in use
o Cut the power supply cable after disconnecting it from the main when you decide
not to use it anymore
The Seller will not be responsible for any damage due to incorrect installation,
improper use or maintenance
Installation of Built-in Ovens
In order to ensure that the built-in appliance functions properly, the cabinet containing it must
be appropriate .The figure below gives the dimensions of the cut-out for installation under the
counter or in a wall cabinet unit.