11
Care and Cleaning
• DO NOT lubricate or immerse in water the LATCH
connectors, the buckle, or any other part of this
child restraint, unless rinsing is permitted, as stated
on the back of the buckle for your restraint.
• Plastic and metal parts may be wiped clean with
mild soap and water and dried with a soft cloth. Do
not use abrasive cleaners or solvents.
• Take care not to damage any labels.
• The harness can be wiped clean with mild soap and
water. Allow harness to air dry.
• Machine wash the seat pad separately in cold
water, delicate cycle. Tumble dry 10 to 15 minutes
on low heat.
• NEVER use child restraint without the seat pad.
• To protect the child restraint from damage caused
by weather, rodents, and other elements common
to garages, the outdoors, and other storage
locations, remove the seat pad and thoroughly
clean the restraint and pad prior to storage. Take
care to clean in the areas where crumbs and other
debris tend to accumulate.
To help protect the
vehicle upholstery, place a
towel beneath and behind
the child restraint.
Tip!
Tip!Tip!
To Next Page