EasyManua.ls Logo

Evenflo Embrace 35 - Using the Locking Clip; When to Use a Locking Clip; Installing a Locking Clip

Evenflo Embrace 35
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
39
A
Loosen the harness
straps (p. 36) and move
the strap A out of the
way.
Insert the crotch strap
anchor
B
into the slot
that is the closest to the
child AND the most
comfortable for the
child.
1
2
B
B
Remove the crotch strap anchor B from its position
on the bottom of the carrier, and push the anchor up
through the slot to the top of the seat.
3
Make sure the anchor is completely through and
is lying flat against the bottom of the seat. Pull up on
the crotch strap to make sure it is securely fastened.
B
For newborn position, place the anchor
B
through the rear slot, then feed
it through the middle slot.
Make sure the anchor is
completely through the middle
slot and is lying flat against the bottom of the seat.
NEVER use this position for children weighing
more than 3.6 kg (8 lbs).

Related product manuals