Evenflo Embrace 35 - Page 45

43
13 mm (0.5 in.)
While holding the belts and
buckle tongue E, thread
the locking clip A onto the
vehicle seat belt, and slide it
into place.
Note: Locking clip must
be placed within 13 mm
(0.5 in.) of seat belt buckle.
3
A
A
E
4
A
Buckle the vehicle seat
belt with the locking clip
A in place.
• If installing the convenience base with a vehicle seat
belt, return to page 24, Step 3.
• If installing the carrier (no convenience base) with a
vehicle seat belt, return to page 31, Step 4.