48
The aircraft seat belt
A
must be as tight as possible.
Route the excess seat belt strap
D
back through the
belt slots
B
, as shown above. Using your full weight,
push the base firmly onto the aircraft seat
while pulling
on the excess
seat belt strap to tighten.
Check your work. Try to move the base in all
directions. If you can move the base more than 25
mm (1 in.) side-to-side or front to back at the belt
path
B
, the aircraft seat belt
A
is not tight enough,
and you MUST install again until the seat belt is tight.
F
Secure the base to the
aircraft
seat by routing
the
aircraft
seat belt through the openings
F
on the
sides of the base.
2
D
A
3
B
Installing Convenience Base in Aircraft
To Next Page
Loading...
