52
The aircraft seat belt
A
must be as tight as possible.
Route the excess seat belt strap
D
back through the
belt slots
B
, as shown above. Using your full weight,
push the child restraint firmly onto the aircraft seat
while pulling on the excess
seat belt strap to tighten.
Check your work. Try to move the child restraint in
all directions. If you can move the child restraint more
than 25 mm (1 in.) side-to-side or front to back at
the belt path
B
, the aircraft seat belt
A
is not tight
enough, and you MUST install again until the seat belt
is tight.
A
B
D
5
Installing Carrier without Convenience
Base in Aircraft
Squeeze both handle releases
C
and move the
handle to Position 1
.
C
Position 1
6
To Next Page