54
To attach cup holder
J
, slide down on the mount
K
, as
shown, until it locks in place with an audible click. Pull on
the cup holder to make sure it is locked into place.
To remove cup holder
J
, slide cup holder up
off of the mount
K
.
ASSEMBLING YOUR STROLLER
3
4
Turn the stroller so the front of the stroller is facing
upwards, as shown.
Slide a front wheel assembly
D
into the front frame
leg
E
until it locks into place with an audible click.
Pull downward on the front wheel assembly to make
sure it is locked securely. Repeat for other side.
Turn the stroller right side up onto its wheels.
To remove, push metal button
C
and pull wheel off stroller.
Step on the rear brake levers
I
to lock the rear wheels on the stroller.
To release the brakes, lift up on the brake levers.
To attach child tray, push tabs
F
into openings
G
on
stroller. Make sure child tray locks into position with
audible clicks. Pull on the child tray to make sure it is
locked into place.
To remove the child tray, push both tabs
H
under
the fabric, and remove the tray from the stroller.
3
E
USING YOUR STROLLER
1
2
To extend canopy, pull it forward as shown.
To close, push canopy toward parent’s handle as shown.
CLICK!
F
CLICK!
K
Always lock both brakes. Make sure
brakes are on by trying to push the stroller.
WARNING
5
H
D
E
G
I
J
WARNING
DO NOT place hot liquids in cup holder.
Spills can burn you or your child.
C
To Next Page
Loading...
