4
ASSEMBLING YOUR STROLLER
3
4
Turn the stroller so the front of the stroller is facing
upwards, as shown.
Slide a front wheel assembly
D
into the front frame
leg
E
until it locks into place with an audible click.
Pull downward on the front wheel assembly to make
sure it is locked securely.
Turn the stroller right side up onto its wheels.
To remove, push metal button
C
and pull wheel off stroller.
To attach child tray, push tabs
F
into openings
G
on
stroller. Make sure child tray locks into position with
audible clicks. Pull on the child tray to make sure it is
locked into place.
To remove the child tray, push both tabs
H
under
the fabric, and remove the tray from the stroller.
E
CLICK!
F
CLICK!
5
H
D
E
G
C
WARNING FALL HAZARD
Wheel can detach and cause tip over. Pull on the
wheel to assure it is securely attached. Periodically
check wheel to assure it is securely attached.
DO NOT inflate tires above the maximum
recommended inflation pressure listed on the side of
the tire. Over inflation may cause wheel and/or tire to
blowout and could result in serious injury. Use manual
bicycle pump to inflate tires.
WARNING
FALL HAZARD from tip over. Before running, jogging,
or walking fast, LOCK the front wheel from swiveling.
To lock, press up.
To unlock, press down.
To Next Page
Loading...
Need help?
General
