57
Lap/Shoulder Belt (Rear-Facing and Forward-Facing)
Installing Lap/Shoulder Belt (Preferred Method)
5. Route lap/shoulder belt through
belt path opening on shoulder belt
side of base and feed through
opposite belt path opening.
BUCKLE THE BELT.
6. The vehicle seat belt must be as
tight as possible. Using your full
weight, push the Base rmly into
the vehicle seat as you tighten the
vehicle seat belt.
7. Secure lap portion of belt under
tabs in blue belt path guide, then
pull up on shoulder belt from
center of base to remove slack.
To Next Page
Loading...
