58
Lap/Shoulder Belt (Rear-Facing and Forward-Facing)
Installing Lap/Shoulder Belt (Preferred Method)
8. Secure shoulder portion of belt
under tabs in blue belt path guide
and apply pressure to fully close the
LockStrong. The Belt Lock indicator
will turn GREEN when fully closed.
NOTE: If belt tensioner does not
fully close (Belt Lock indicator still
RED), open the LockStrong and try
loosening the lap/shoulder belt strap
slightly.
NEVER place any part of vehicle
belt over LockStrong, even in a
vehicle with longer Buckle Stalks.
This will prevent proper operation of
the Car Seat.
2
1
4
3
Vehicle Belt Installation
Instalación con cinturón del vehículo
Open Route Close
and lock
Or
Tighten
lap belt
Apreta cinturón
para regazo
Tighten lap/
shoulder belt
Apreta cinturón
para regazo y
hombro
Cierre y
bloquear
Ruta Abre
O
25809910 8/22
2
Instalación con conectores inferiores
Lower Connector Installation
3
1
4
TightenOpen Close and lock
Attach
Aprete Abre
25809912 8/22
Cierre y bloquearAcople
To Next Page
Loading...
