61
Lap/Shoulder Belt (Rear-Facing and Forward-Facing)
Installing Lap/Shoulder Belt (Preferred Method)
NOTE: A locking clip may be
needed (see pg. 26). Refer to
your vehicle Owner’s Manual for
information.
11. Pull the Tether Adjuster Strap to
tighten.
12. Install Seat Shell to Base (pg.
54), move Seat Shell to the
appropriate REAR-FACING or
FORWARD-FACING position
based on the child’s size (see pgs.
10 and 12), and lock into position.
13. Conrm that the seat is in a
locked position by checking that
the Seat Lock Indicator is GREEN.
To Next Page
Loading...
