120
Removing/Replacing the Seat Cover
6. Pull seat pad over seat base. Pull
harness adjustment strap through
slot at front of seat pad, then pull
Buckle Strap through appropriate
slot in seat pad (see pg. 44).
NOTE: While not necessary,
removing the cup holders from the
seat may make it easier to replace
the seat pad.
7. From the front of the seat, make
sure the Harness Straps are
properly routed and secure the
hook-and-loop fasteners connecting
the back pad to the seat pad.
buckle
storage
Standard Seat Cover
To Next Page
Loading...
