50
Car Seat Features
Lower Anchor Connectors
The Revolve360 Extend is equipped
with either Mini Latch™ or Standard
Hook Lower Anchor Connectors.
Follow the instructions in this section
to properly install the Lower Anchor
Connectors on your Car Seat.
Removing the Lower Anchor
Connector
To remove the Lower Anchor
Connector from storage or vehicle
LATCH/UAS anchors:
• Mini Latch - Pull the red Lower
Anchor Connector Release Strap
and pull the Connector out.
• Standard Hook - Squeeze, push in,
and twist to remove the hook.
Standard Hook
Mini Latch
To Next Page
Loading...
