Evenflo SureRide - Adjusting the Recline Stand

37
36
Adjusting the Recline Stand
Lift the child restraint and
flip the recline stand
A
,
located under the child
restraint seat, to either the
upright or recline position.
Note: Recline position is
to be used for rear-facing
ONLY.
Upright
Recline
A
To fold the recline stand
A
, turn the child restraint
upside down. Pull the shell walls away from the locking
tabs
C
on the sides of the recline stand and rotate the
recline stand downward until it lies flat, as shown.
A
C
C
A
Note: Never route the harness belts over the recline stand.
FOR CANADIAN CONSUMERS ONLY:
When the recline stand is
in the recline position,
wrap Velcro
®
strap around
the recline stand
A
and
insert the end of the strap
through the D-ring
B
, as
shown.
A
B
Pull until just taut and
adhere Velcro to itself, as
shown. (Overtightening
could cause the strap to
detach from the product).