To Next PageTo Next Page
Need help?Do you have a question about the Evenflo Triumph LX Charleston and is the answer not in the manual?
Specifies weight and height ranges for rear-facing and forward-facing use.
Emphasizes reading the manual before use to prevent injury or death.
Confirms compliance with US (FMVSS 213) and Canadian safety standards.
Explains symbols for airbag, LATCH, tether anchor, and aircraft safety information.
Details weight, height, and age criteria for safe rear-facing and forward-facing use.
Provides recommendations for safely transporting preterm and low-birth weight infants.
Warns about airbag interaction with rear-facing restraints and side airbags.
Covers critical warnings on restraint use, unattended children, and safe seating locations.
Details requirements for forward-facing use and seat belt installation concerns.
Advises on safe practices like avoiding distractions and securing children properly.
Critical warnings and instructions for using the LATCH system, including weight limits.
Covers tether strap safety and other precautions like checking restraint temperature.
Instructions for registering the restraint for safety recalls and contacting authorities.
Guidance on using the restraint in vehicles/aircraft and storing the manual.
Illustrates and labels vehicle seat belt and anchor components for restraint installation.
Diagrams showing seat belt routing and warnings about front seat airbag placement.
Identifies and labels the various parts and features visible from the front of the child restraint.
Identifies and labels the various parts and features visible from the back of the child restraint.
Step-by-step checklist for properly installing the child restraint in the rear-facing position.
Warns against loosening the seat belt for leg room, as it compromises child protection.
Instructions for setting the restraint to the correct recline position (Position #1) for rear-facing use.
Details how to route the vehicle seat belt through the rear-facing belt path and fasten it correctly.
Guidance on how to tighten the seat belt and check for proper installation stability.
Instructions on when and how to install a locking clip for older vehicles with specific seat belt systems.
Critical warnings and instructions for using the LATCH system in the rear-facing configuration.
Illustrates and describes the two types of lower anchor connector assemblies.
Instructions on inserting the lower anchor connector straps into the rear-facing belt path openings.
Guidance on attaching the lower anchor connector hooks or clips to vehicle anchor bars.
Step-by-step checklist for properly installing the child restraint in the forward-facing position.
Specifies mandatory age, weight, and height criteria for forward-facing use.
Details the Intermediate and Full Upright recline positions for forward-facing use.
Instructions for routing the seat belt and a warning about the seat belt release button.
Guidance on tightening the seat belt and checking stability for forward-facing installation.
Instructions for using a locking clip if required for forward-facing installation.
Instructions for connecting the tether hook to the vehicle's tether anchor and tightening the strap.
Warnings and instructions for properly storing excess tether strap to prevent hazards.
Critical warnings and instructions for using the LATCH system in the forward-facing configuration.
Illustrates and describes the two types of lower anchor connector assemblies.
Instructions on inserting the lower anchor connector straps into the forward-facing belt path openings.
Guidance on attaching lower anchor connectors to vehicle anchor bars for forward-facing installation.
Instructions on placing the baby correctly in the restraint, ensuring back and bottom are flat.
Guides on adjusting harness straps and sliding buckle tongues to secure the child snugly.
Details on checking harness snugness and ensuring no slack, preventing pinching.
Instructions for moving the crotch strap to the closest slot to the child for proper fit.
Steps for unfastening the chest clip, buckle, and crotch buckle to remove the child.
Instructions on releasing and removing the lower anchor connector hooks or clips from the vehicle.
Steps for loosening, detaching, and storing the tether strap.
Instructions on how to unbuckle harness straps and unfasten seat pad hooks for removal.
Instructions for placing the seat pad in the shell and tucking edges around cup holders.
Guidance on fastening the seat pad hooks from the top of the seat downwards.
Instructions for installing optional accessories for infant support in the rear-facing position.
Steps for removing the headrest if the child's ears are above its highest position.
Ensuring the aircraft seat is in a fully upright position before installing the restraint.
Instructions for routing the aircraft seat belt through the rear-facing belt path openings.
Ensuring the aircraft seat is in a fully upright position before installing the restraint.
Instructions for routing the aircraft seat belt through the forward-facing belt path openings.
Guidance on checking and ensuring the aircraft seat belt is tight for secure installation.
Instructions on cleaning plastic, metal, harness, and seat pad components.
Information on how to order replacement parts and what details are needed.
Details the warranty period, coverage, and procedures for obtaining warranty service.
Specifies weight and height ranges for rear-facing and forward-facing use.
Emphasizes reading the manual before use to prevent injury or death.
Confirms compliance with US (FMVSS 213) and Canadian safety standards.
Explains symbols for airbag, LATCH, tether anchor, and aircraft safety information.
Details weight, height, and age criteria for safe rear-facing and forward-facing use.
Provides recommendations for safely transporting preterm and low-birth weight infants.
Warns about airbag interaction with rear-facing restraints and side airbags.
Covers critical warnings on restraint use, unattended children, and safe seating locations.
Details requirements for forward-facing use and seat belt installation concerns.
Advises on safe practices like avoiding distractions and securing children properly.
Critical warnings and instructions for using the LATCH system, including weight limits.
Covers tether strap safety and other precautions like checking restraint temperature.
Instructions for registering the restraint for safety recalls and contacting authorities.
Guidance on using the restraint in vehicles/aircraft and storing the manual.
Illustrates and labels vehicle seat belt and anchor components for restraint installation.
Diagrams showing seat belt routing and warnings about front seat airbag placement.
Identifies and labels the various parts and features visible from the front of the child restraint.
Identifies and labels the various parts and features visible from the back of the child restraint.
Step-by-step checklist for properly installing the child restraint in the rear-facing position.
Warns against loosening the seat belt for leg room, as it compromises child protection.
Instructions for setting the restraint to the correct recline position (Position #1) for rear-facing use.
Details how to route the vehicle seat belt through the rear-facing belt path and fasten it correctly.
Guidance on how to tighten the seat belt and check for proper installation stability.
Instructions on when and how to install a locking clip for older vehicles with specific seat belt systems.
Critical warnings and instructions for using the LATCH system in the rear-facing configuration.
Illustrates and describes the two types of lower anchor connector assemblies.
Instructions on inserting the lower anchor connector straps into the rear-facing belt path openings.
Guidance on attaching the lower anchor connector hooks or clips to vehicle anchor bars.
Step-by-step checklist for properly installing the child restraint in the forward-facing position.
Specifies mandatory age, weight, and height criteria for forward-facing use.
Details the Intermediate and Full Upright recline positions for forward-facing use.
Instructions for routing the seat belt and a warning about the seat belt release button.
Guidance on tightening the seat belt and checking stability for forward-facing installation.
Instructions for using a locking clip if required for forward-facing installation.
Instructions for connecting the tether hook to the vehicle's tether anchor and tightening the strap.
Warnings and instructions for properly storing excess tether strap to prevent hazards.
Critical warnings and instructions for using the LATCH system in the forward-facing configuration.
Illustrates and describes the two types of lower anchor connector assemblies.
Instructions on inserting the lower anchor connector straps into the forward-facing belt path openings.
Guidance on attaching lower anchor connectors to vehicle anchor bars for forward-facing installation.
Instructions on placing the baby correctly in the restraint, ensuring back and bottom are flat.
Guides on adjusting harness straps and sliding buckle tongues to secure the child snugly.
Details on checking harness snugness and ensuring no slack, preventing pinching.
Instructions for moving the crotch strap to the closest slot to the child for proper fit.
Steps for unfastening the chest clip, buckle, and crotch buckle to remove the child.
Instructions on releasing and removing the lower anchor connector hooks or clips from the vehicle.
Steps for loosening, detaching, and storing the tether strap.
Instructions on how to unbuckle harness straps and unfasten seat pad hooks for removal.
Instructions for placing the seat pad in the shell and tucking edges around cup holders.
Guidance on fastening the seat pad hooks from the top of the seat downwards.
Instructions for installing optional accessories for infant support in the rear-facing position.
Steps for removing the headrest if the child's ears are above its highest position.
Ensuring the aircraft seat is in a fully upright position before installing the restraint.
Instructions for routing the aircraft seat belt through the rear-facing belt path openings.
Ensuring the aircraft seat is in a fully upright position before installing the restraint.
Instructions for routing the aircraft seat belt through the forward-facing belt path openings.
Guidance on checking and ensuring the aircraft seat belt is tight for secure installation.
Instructions on cleaning plastic, metal, harness, and seat pad components.
Information on how to order replacement parts and what details are needed.
Details the warranty period, coverage, and procedures for obtaining warranty service.
General
