Evenflo Titan - User Manual

OWNER’S MANUAL
Keep for future use.
© Evenflo Company, Inc. 2012
25700884 8/12
Titan
Infant/Child Restraint System
Child Requirements
Weight: 2.3 – 22.6 kg (5 – 50 lbs)
Height: 48 – 119 cm (19 – 47 inches)
TM
To reduce the risk
of SERIOUS INJURY or
DEATH, read this owner’s
manual prior to installing
and using this child
restraint.
WARNING
WARNING

Summary

Child Requirements

Rear-facing Usage Requirements

Specifies the weight and height limits for using the restraint in the rear-facing position.

Forward-facing Usage Requirements

Specifies the weight, height, and age limits for using the restraint in the forward-facing position.

Vehicle Safety Warnings

Vehicle Seating Location Warnings

Air Bag Warning

Premature Infant Precautions

Installation Safety Warnings

Forward-facing Use Warnings

Vehicle Seat Belt Warnings

LATCH System Installation Guidance

LATCH System Warnings

Warnings and guidelines for using the LATCH system for installation.

Additional Safety Guidelines

Top Tether Warnings

Warnings and instructions for properly using the top tether strap.

General Safe Practices

Safe Practices Overview

Guidelines for safe use of the child restraint and child in the vehicle.

Using the Titan Rear-facing

Rear-facing Child Requirements

Specifies the weight and height limits for rear-facing use.

Rear-facing Installation Guide

Using the Titan Forward-facing

Forward-facing Child Requirements

Specifies the weight, height, and age limits for forward-facing use.

Forward-facing Installation Guide

Secure Restraint to Vehicle Seat

Steps for securing the restraint to the vehicle seat.

Set Child and Adjust Straps

Instructions for placing the child and adjusting harness/buckles.

Final Installation Check

Steps to check the restraint's security and fit after installation.

Rear-facing Installation: Seat Belt

Prepare and Position Restraint

Steps for preparing the restraint and placing it correctly for rear-facing installation.

Attach Harness Straps

Instructions on attaching harness straps using the splitter plate.

Rear-facing Seat Belt Routing

Finalizing Rear-facing Seat Belt Installation

Rear-facing Installation: LATCH System

Rear-facing LATCH Connection

Prepare Restraint and Position

Attach LATCH Harness Straps

Finalizing Rear-facing LATCH Installation

Forward-facing Installation: Seat Belt

Harness Slot Positioning

Guidance on positioning harness straps in the correct upper slots.

Position Restraint Forward-facing

Route Vehicle Seat Belt

Instructions for threading the vehicle seat belt through the restraint.

Finalizing Forward-facing Seat Belt Installation

Fasten and Secure Seat Belt

Tighten and Check Seat Belt

Instructions for tightening the seat belt and checking the installation's security.

Forward-facing Installation: Top Tether

Attach and Tighten Top Tether

Forward-facing Installation: LATCH System

LATCH System Overview

Explanation of the LATCH system and its use for child restraints.

Forward-facing LATCH Connection

Harness Strap Positioning

Position Restraint and Route LATCH

Finalizing Forward-facing LATCH Installation

Attach LATCH Hooks to Anchors

Tighten and Check LATCH Harness

Positioning the Harness Strap

Rear-facing Harness Placement

Forward-facing Harness Placement

Adjusting the Recline Stand

Recline Position Overview

Rear-facing Recline Setup

Recline Stand Adjustments

Forward-facing Upright Setup

Using the Locking Clip

Locking Clip Application Guide

Locking Clip Installation

Thread and Secure Locking Clip

Securing Your Child

Fasten Harness and Chest Clip

Adjusting Restraint Straps

Adjusting the Crotch Strap

Adjusting the Harness Strap

Evenflo Titan Specifications

General

Weight Limit (Rear-Facing)	5-40 lbs
Weight Limit (Forward-Facing)	22-65 lbs
Harness Type	5-point harness
Orientation	Rear-Facing and Forward-Facing
Type	Convertible Car Seat
Recline Positions	3
Washable Cover	Yes
Height Limit (Forward-Facing)	28-49 inches
Installation	LATCH
Safety Features	Side Impact Tested