EasyManua.ls Logo

Evenflo Titan - Forward-facing LATCH Connection; Harness Strap Positioning; Position Restraint and Route LATCH

Evenflo Titan
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
Adjust the child restraint to the upright position (p. 29)
and place in your vehicle forward-facing, as shown.
Route the LATCH harness and hook through each side
of the forward-facing belt path C.
WARNING
DO NOT use the two lower harness slots forward-facing.
The harness may not properly restrain the child in the
event of a crash.
B
A
2
Make sure that
the harness straps are in one of
the two upper strap slots A
and the splitter plate is attached
to the bottom of the harness
strap in the toddler position B
(p. 28). This will provide more
room for your toddler to fit
comfortably.
C
1
A

Related product manuals