C
20
Place the child restraint in
your vehicle forward-
facing.
Adjust the child restraint to
the upright position (p. 29).
Thread the vehicle seat
belt
C through the child
restraint.
Note: Lift the pad away for
easier access.
If the vehicle belts are not
routed and fastened cor-
rectly, the child restraint
may not protect your child
in a crash.
WARNING
Installing Your Child Restraint
Forward-facing Using a Seat Belt
DO NOT use the two lower harness slots forward-facing.
The harness may not properly restrain the child in the
event of a crash.
1
B
A
2
3
WARNING
Make sure that
the harness straps are in one of
the two upper strap slots A
and the splitter plate is attached
to the bottom of the harness
strap in the toddler position B
(p. 28). This will provide more
room for your toddler to fit
comfortably.
A
To Next Page
Loading...
