1
14
Installing Your Child Restraint
Rear-facing Using a Seat Belt
Arrow MUST be level
with ground when used
Rear-Facing
REAR OF VEHICLE
Infants MUST always ride facing the rear of the
vehicle. The back of the child restraint supports and
protects the baby and absorbs crash forces.
Adjust the child restraint to the recline position (p. 29).
Place the child restraint in your vehicle rear-facing.
Adjust the restraint so that the level arrow A is level
with the ground.
Attach the harness
straps
B to the splitter
plate C using the infant
position (p. 28) on the
harness straps.
As your child grows, you
can attach the harness
straps B to the splitter
plate using the pockets at
the end of the straps.
2
NEVER turn a child restraint
forward-facing with an infant
weighing less than 10 kg (22 lbs)
or who is less than one year of age.
Crash forces may cause serious
injury or death.
WARNING
C
BB
To Next Page
Loading...
