EasyManua.ls Logo

Evenflo Titan - Finalizing Rear-facing Seat Belt Installation

Evenflo Titan
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
5
The seat belt must be as tight as possible.
Put your full weight into the child restraint as you
tighten the seat belt F.
Check your work. If you can move the child re-
straint more than 25 mm (1 inch) forward or side-
to-side at the belt path G, the seat belt is not tight
enough, and you MUST try again.
•Ifvehicleseatbeltsarenotroutedandfastened
correctly, the child restraint may not protect your
child in a crash.
•DO NOT use this child restraint if it moves more than
25 mm (1 inch) forward or side-to-side at the vehicle
belt path. Serious injury or death may result from
poor installation. If you cannot tightly secure the child
restraint, try again or move it to another location.
WARNING
G
F
Ö
Ö

Related product manuals