2. Intended use.
This product is intended to charge and discharge Ni-
MH and Ni-Cd rechargeable batteries of AA (R6) and AAA
(R03) sizes.
It is equipped with four independent charging slots. It
uses highly optimized charging process with -∆V full charge
termination method for maximum battery performance.
Refresh mode can restore battery's full capacity and
minimize memory and "lazy battery" effects.
NC 1000 is able to charge batteries of different types, sizes
and capacities at the same time. Charge and discharge
currents are fully adjustable for each cell. At the end of
charge process batteries are switched to trickle charge
mode to maintain their full charge state.
Charger should be only used with provided AC/DC
adapters.
This product is in conformity with all
provisions of Directive LVD 2006/95/EC,
Directive EMC 2004/108/EMC and it
complies with relevant European
Standards (EN).
3. Package contents.
Each box contains:
- everActive NC-1000 charger,
- user’s manual,
- AC/DC power adapter,
To Next Page
Loading...
