Everbilt 22042226 - Installation Steps; Mark Water Level; Turn Off Water Supply; Drain Toilet Tank

4
Installation
MARK WATER LEVEL TURN OFF WATER
MARK WATER LEVEL DRAIN WATER
1 2
3 4
□ Mark the water level (WL1) in the bowl with a pencil
□ Use a pencil to mark the water level 2A (WL2A).
□ Turn off the water supply (1).
□ Remove the water supply line from the bottom of the
□ Flush the toilet and mark residual water level 2B (WL 2B).
□ Measure and record the distance “L” from WL2A to WL2B.
□ Remove excess water from the tank with a sponge.
WL 1
2
1
WL 2A
WL 2B
L
WL 2A