Everbilt 22042226 - Remove Old Components; Clean and Dry Tank; Release Handle and Seat Convertor

HOMEDEPOT.COM
Please contact 1-800-305-1726 for further assistance.
5
Installation (continued)
REMOVE OLD COMPONENTS
CLEAN AND DRY
RELEASE THE HANDLE SEATING THE CONVERTOR
5 6
7 8
□
□ Press to release handle.
□ Clean the tank and surface of the pedestal with a towel
and soapy water, then dry.
□ Seat the black rubber base of the convertor (B) into the
NOTE: Convertor should sit completely and vertically.
Release-push
C
B