II. Features and parts
Due to technological innovations, the product descriptions in this manual may not be completely consistent with
your refrigerator. Detailed information is in accordance with the final product.
III. Preparations for use
Installation location:
1. Ventilation condition
The position you select for the refrigerator installation should be well-ventilated and has less hot air. Do not locate the unit
near a heat source such as cooker, and avoid it from direct sunlight, thus guaranteeing the refrigerator effect while saving
energy consumption. Do not locate the refrigerator in the damp place, so as to prevent it from rusting and leaking
electricity.
Note: The amount of refrigerant charged for the unit can be found on the nameplate.
2. Heat dissipation space
When working, the unit gives off heat to surroundings. Therefore, at least 300mm(11.8”) of free space should be spared at
the top side, more than 100mm(3.9”) on both sides, and above 50mm(2”) at the side of the refrigerator.
Dimensions suggested below:
Fig. 1 Fig. 2
Note：Figure 1, Figure 2 only illustrate the space demand of the product.
To Next Page
Loading...
Need help?
General
